To give designers a better idea of what they are working on we have attached a picture showing the type of banner and pedestal they are working on (Banner example.png)
Please follow the provided artwork guidelines for the banner (Banner_Artwork_Guidelines.pdf). Note that the final artwork needs to be submitted at 25% of the final print size (THE DIMENSIONS IN THIS DOCUMENT ARE ALREADY AT 25% SIZE).
For the pedestal please follow the guidelines shown in the pedestal artwork template (Pedestal artwork template.png) NOTE THAT THE PROVIDED DIMENSIONS (1240x990mm) ARE FULLSIZE, FINAL ARTWORK MUST BE AT 25% (i.e. 310x247.5mm)
We’d like the design to incorporate the Owlstone logo (vectorized version provided - Owlstone_logo.eps) and rings motif that appears on our website (http://www.owlstonenanotech.com/). We have included a screenshot of the ring motif (Owlstone rings.png). Colors and styling similar to our website is preferred
The design of Panel 1 needs to incorporate a computer monitor (see ‘Monitor dimensions.png’ for dimensions) that will cover an area of the banner (140x100mm). This requires there to be a hole in the banner, which needs to be centred horizontally across the media panel (panel 1). The bottom of the hole should start 355 mm from the bottom of the panel, and the hole itself should be 75mm wide x 53.75mm high. (dimensions given at 25% size).
The banner consists of 3 separate sections that are joined magnetically. Please bear in mind when placing product images and text that anything overlaying the joins may not align perfectly.
Please keep any important text/graphics towards the top of the banner as we will be sitting/standing in front of it at most of the time
Feel free to use additional images/graphics